Specification : • Spindle gauge: 220mm • No. of spindles: 24
• Machine type : 2 right hand and 2 left hand • Adaptable staple length for cotton: 22-38mm • Size of bobbin: dia.45mm, length 445mm • Flyer spindle shaft diameter : 22mm • Full package: dia.152mm length 406mm • Suitable count: Nm 0.8-5.0 • Total drafting range: 4.13-13.28 • Twist range: 1.76—7.44/10CM • Flyer type: Closed type with stainless tube with aluminum presser. • Programmable controller (PLC) adopts SIEMENS • Frequency converter: (one inverter for flyer and roller, one inverter for • lifting and winding) • Drafting system: four-roller short double apron system, with Texpartspendulum arm SKF-PK1500, • Top roller LP1015, LP1015, LP1017, LP1015 and OH514 top apron cradle, cot of Armstrong. • Top rollers size: outside Dia. 28, 28,25,28mm, width 40mm, hardness: 800 ±30.
• Rubber cot maker: Armstrong • Top apron size: inside dia.37mm, thickness 0.9±0.02mm , width:39.5mm • Bottom apron size: inside dia.38mm, thickness 1.2±0.02mm, width:39.5mm • 18. Bottom rollers : Dia.: 28.5mm, 28.5mm, 28.5mm, 28.5mm fluted hardened chrome-plated bottom roller, with needle bearing .Front,2nd,Back –Helical & 3rd-Knurled. • 19. Mechanical spindle speed: max. 1600rpm Practical spindle speed: up to 1200rpm (for cotton), up to 1400RPM (for polyester) • 20. Creel: gantry creel with five rows of guide rollers with bearing system (500X1100mm, stainless) • Positive driven. • 21. Counter: pre-determined length counter. • 22. Shift counter for 4 shifts: 3 shift in normal, 1 for spare • 23. Stop motion: Five photocells are equipped, Origin: USA consisting of one rear sliver breakage, two roving breakage, and two for safety operation in front of the machine. • 24. Signal lamps numbers and each function: 4 pieces o Red: roving broken o Yellow: sliver broken o Blue: flyer safety o Green: full bobbin indication • 25. Multi-display panel: spindle speed, fixed length, accumulated length, current Length